1. The stainless steel angle valve
has a simple flow path in use, and the dead zone and the eddy current zone are small. With the help of the scouring effect of the medium itself, it can effectively prevent the medium from clogging, and keep itself clean and smooth. At the same time, the stainless steel angle valve has a small flow resistance. The flow coefficient is larger than that of the single-seat valve, which is equivalent to the flow coefficient of the double-seat valve. Stainless steel angle valve is suitable for occasions containing suspended solids, high viscosity, granular fluid, and can be placed in a limited manner due to the obstruction of objects.
2. The quality of the stainless steel angle valve is directly related to the safety of its use. Care must be taken when purchasing and installing stainless steel angle valves. When choosing, look at the material. The quality of the high-quality stainless steel angle valve is better, and it can be used in a very It can greatly increase its service life and ensure long-term safety. In addition to the stainless steel itself, pay attention to the electroplating luster on the surface of the stainless steel angle valve when purchasing, not only to ensure a bright surface, but also to feel smooth and flawless. When purchasing stainless steel angle valves, the most important point is to look at the brand, and you must not be greedy for convenience or cheap to buy at will to avoid unnecessary losses.
3. The main function of the stainless steel angle valve is to control the water pressure when the water pressure is unstable or the water pressure is too large, so as to prevent the water parts in the toilet, washbasin and other water parts from bursting due to excessive water pressure, making it sealed The damage of the rubber ring leads to water leakage. The use of the stainless steel angle valve can also facilitate future maintenance and replacement of the hose, and play the function of transferring the internal and external water outlets. In use, if the water pressure is too high, it can be adjusted on the stainless steel angle valve.
Fourth, the stainless steel angle valve plays an essential but very inconspicuous role in home decoration, such as the heating and cooling control of toilets and water heaters. The stainless steel angle valve is a pressure-bearing component and needs to withstand 1.6MPA. The stainless steel angle valve is widely used and can be divided into civil and industrial use. I believe that most people do not know much about the specifications of stainless steel angle valves. The following is a detailed introduction to the specifications of stainless steel angle valves.